ResMed Swift™ FX Nasal Pillow CPAP Mask with Headgear (2024)

Learn More About Your New Mask

ResMed Swift FX Features and Benefits:

  • Maintains a Consistent Seal Even at High Therapy Pressures
  • Minimal Design Creates Ergonomic Comfort
  • Easy to Find Your Right Fit
  • Leading in Innovation for Headgear
  • The Perfect Ultra-Quiet Mask for Light Sleepers

The Swift FX Nasal Pillow Mask is Ideal For:

  • Light Sleepers
  • Active Sleepers
  • Side Sleepers
  • Petite and Wide Facial Structures
  • If You Watch T.V. or Read Before Bed
  • If You Are Claustrophobic
  • If You Have Facial Hair
  • If You Are New to CPAP

Maintains a Consistent Seal Even at Maximum Therapy Pressure

To improve your mask seal and comfort, the nasal pillows on the Swift FX nasal pillow mask are designed with dual-wall flaps for a super soft fit. The mask cushion is outfitted with an integrated flexible chamber that provides stability for side sleepers while adding flexibility to accommodate movement for more reliable sleep apnea therapy.

Minimal Design Creates Ergonomic Comfort

The Swift FX’s slim mask frame has bare minimum facial touchpoints and is nearly invisible thanks to the pillow cushion’s seamless connection to the frame. With an unobtrusive design that hugs your unique facial contours, the lightweight Swift FX opens up your line of sight and allows for easy T.V. watching or reading before bed - all with fewer facial marks in the morning.

Easy to Find Your Right Fit

This minimal appearance and unprecedented softness of the nasal cushion help foster a sense of freedom and promote early CPAP acceptance. The ResMed Swift FX comes with the following sizes of nasal pillows: small, medium, large.

Extra Small pillows are sold separately. All pillow sizes are interchangeable with the mask frame.

Leading in Innovation for Headgear

Utilizing a soft, silicone headgear, the Swift FX’s minimal design is simple to use with only two points to adjust: a low-profile Lycra-based backstrap with Velcro fasteners and a buckle on the top of your head that uses a set of notches for easy adjustment. For easy removal of the mask, the headgear uses a set of "lock and key" quick-release tabs that secure the silicone straps.

To ensure your maximum comfort and to help keep your headgear in place, we’ve included a set of soft wraps that are made of fleece material to wear on the headgear side straps.

The Perfect Ultra-Quiet Mask for Light Sleepers

Reduce CPAP noise to only 25 decibels with the Swift FX mask! To ensure you and your partner sleep soundly, the exhalation ports on the frame help to disperse exhaled air gently out and away from you. This innovative placement also helps to dampen the audible motor and airflow noise.

What’s Included:

  • ResMed Swift FX Short Tube Assembly (Mask)
  • ResMed Swift Fx Headgear
  • Small, Medium, and Large Swift FX Nasal Pillows
  • 1 Set of Swift FX Soft Wraps

Mask Type: Nasal Pillow

Headgear / Frame Sizes:

  • One Size Fits Most

Suggested Replacement Schedule:

The nasal pillows for the Swift FX should be replaced once every six months.

Headgear Included: Yes

Replaceable Cushion: Yes

Cushion Type: Silicone

Includes Multiple Cushion Sizes: Yes

Good For:

  • Active Sleepers
  • Claustrophobia
  • Facial Hair
  • Readers / TV Watchers
  • Small Faces
  • Wide Faces

Sleep Position:

  • Back
  • Side

Breathing Preference: Nose

Product Warnings:

The short tube assembly of the Swift FX Nasal Pillow (elbow, short tube, and swivel) isNOTinterchangeable with the Short Tube Assembly for Swift FX Nano.

CPAP.com always offers these services

  • 24 hour access to our CPAPtalk.com Support Forum
  • Learning Center for information on sleep apnea and cpap equipment
  • Consumer Purchasing Trends Reports
  • Warranty Services for all items purchased through CPAP.com
  • Insurance Compliant Invoices
  • Free Prescription Request System

Manufacturer Note

  • Some product images supplied by ResMed © ResMed 2010 Used with Permission.
  • All services provided by CPAP.com, including advertisem*nt, ordering, sale, delivery, instruction, and setup of the products are performed solely by CPAP.com and independently of the manufacturer.
  • A valid prescription is required for the purchase of this product.

The nasal pillows for the Swift FX should be replaced once every six months.

Cleaning Tips

The parts of the mask excluding headgear should be hand washed daily using warm water and mild soap.

  1. Wash the nasal pillows with drinking water and a little soap, or use mask wipes for an even better clean.
  2. Rinse thoroughly with water until all the suds have been removed.
  3. Set aside to air dry out of direct sunlight.

Swift FX Headgear Size

The elastic backstrap used with the ResMed Swift FX measures 16.5 inches long (not including tabs). This is 1.5 inches longer than the backstrap for the Swift FX For Her which is 15 inches long (not including tabs). The tabs add 2.5 inches to the overall length of the elastic backstrap. The width of the backstrap is 3/4 inches for both. The silicone portions of the headgear are the same for the Swift FX and the Swift FX for Her.

Where do I find the size?

The size of the nasal pillow is indicated with a black letter located on the front of the nasal pillow. The letter is found on the right-hand silicone flap of the nasal pillow, designed to connect to the headgear.

For help with using your new Swift FX, read through ResMed's Swift FX User Guide.

For help with fitting, read through ResMed's Swift FX Fitting Guide.

For help with fitting, read through ResMed's Swift FX Components Card.

Short Tube Assembly for Swift™ FX Nasal Pillow (elbow, short tube, and swivel)

$51.00 $74.00

$14.00 $14.50

Pad A Cheek Pads for Swift FX™ Bella Loops

$14.95

SnuggleCover Set for Swift™ FX Bella Headgears

$18.50

Headgear Assembly and Bella Headgear Loops for Swift™ FX Nasal Pillow Mask

$44.00

Bella Headgear Loops for Swift™ FX Nasal Pillow Mask

$27.95

Silicone Headgear Assembly for Swift™ FX for Her

$34.00

Swift™ FX Nasal Pillow CPAP Mask Assembly Kit

$73.00 $86.99

Soft Wraps for Swift™ FX and Swift™ FX Nano CPAP Masks

$9.45

Silicone Headgear Assembly for Swift™ FX Nasal Pillow

$34.00

Nasal Pillows for Swift™ FX CPAP Mask

$22.00

What’s the Difference Between the Swift FX and Swift LT?

The Swift FX and Swift LT mainly differ in their design and fit. The Swift FX has a simple fit with slim straps worn over your cheeks, and it’s 71% quieter than previous mask models. On the other hand, the Swift LT uses a patented rotating barrel and has a unique fit that comes down your forehead over your nose, giving you more freedom of movement.

What’s the Difference Between the Swift FX and Swift Nano?

The Swift FX and Swift Nano are both excellent masks, but there are big differences between the two including the cushion, elbow joint, and headgear strap. You can learn more—and see a video highlighting the main differences between these two masks—here!

Can I Use the Bella Loop Headgear With the Swift FX?

Yes—you can use Bella Headgear Loops with the Swift FX, which are available in pink and gray. They are a dreamy alternative to traditional headgear.

Is the Swift FX Compatible With Any CPAP Machine?

Absolutely! This mask uses standard tubing and is compatible with all CPAP machines on the market that use standard tubing.

Can I Use the Swift FX if I Wear Glasses?

Because the straps of the Swift FX fit over your cheekbones, it may not be ultra-comfortable to wear your glasses with your mask. This mask does have an open line of sight that lets you watch TV or read a book before bed.

Can I Replace the Swift FX Cushion?

We recommend replacing your Swift FX pillows every three to six months or sooner if you notice the pillows are damaged or deteriorating from facial oil build-up. Replacement parts for the Swift FX can be found in the "Replacement Parts" tab.

ResMed Swift™ FX Nasal Pillow CPAP Mask with Headgear (2024)

References

Top Articles
Latest Posts
Article information

Author: Sen. Emmett Berge

Last Updated:

Views: 6255

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Sen. Emmett Berge

Birthday: 1993-06-17

Address: 787 Elvis Divide, Port Brice, OH 24507-6802

Phone: +9779049645255

Job: Senior Healthcare Specialist

Hobby: Cycling, Model building, Kitesurfing, Origami, Lapidary, Dance, Basketball

Introduction: My name is Sen. Emmett Berge, I am a funny, vast, charming, courageous, enthusiastic, jolly, famous person who loves writing and wants to share my knowledge and understanding with you.