KITO’s Sling Chain is High Quality as same as Load Chain used with Hoits.
Advanced Chain Manufacturing Technologies Realize Outstanding Link Chains
[Ultimate Elongation]
KITO link chains have both a high breaking stress and toughness due to the advanced chain manufacturing technologies that are utilized. This is verified by the numerical value of 20% or more achieved for the ultimate elongation based on the JIS standards requirements.
[Bending Capacity]
Concerning the strength in the link bending directin, the use of advanced welding technologies gives the links sufficient absorbability as shown by the photograph (below) of the result of beding test, and no breakage or cracking occours. (However, this does not indicate that the product should be used until it reaches the condition shown in the photograph.)
Wide Range of Variations allow Selection of the Optimum Combination for Any Application
Standard link chains are provided in various diameters from φ6.0 mm to φ20.0 mm to support work lifting heavy and large-sized objects. The link chain and fitting combinations offer clevis-type products with exclusive retaining pins, and eye-type products which use Hicouplings.
Since a wide range of fittings are also available, it is possible to freely select from among single leg, double leg, triple leg, quadruple leg, and endless types to match the usage purpose.
“Adjustment of Length” can be made, which is not Possible when Using Wires
Chain sling can have their lengths adjusted in single link units to conduct load tilt adjustment or quickly change the sling length, which is not possible when using wires. Depending on the application, the shortening clutch (VWW) or grab hook (VGG, HGG) should be used.
When the load will not change for a certain period, use the shortening Clutch (VWW).
This has a chain dropout prevention function so that the chain will not drop out unexpectedly. Once the length has been set, work can be conducted repeatedly.When the load changes frequently, use the Grab Hook (VFF, HGG).
Because attaching and detaching is easy, length adjustment can be swiftly conducted even if the load changes.
Allows Use Even in Severe Working Environments
The KITO Chain Sling 100 [S5 Series] is actively utilized even in severe working environments. Nickel-plated chain specifications, which are resistant to rusting are recomended for environments that are greatly affected by rainwater, seawater, steam and chemicals. Please consult KITO when you intend to use products for special applications such as in acid or alkaline solutions.
Link Chain & Fittings
KITO link chain grade 10 achieves the world’s strongest level.
Specifications
※Major capacities example
| Code | Chain Diameter d (mm) | W.L.L. (t) | Pitch p (mm) | Maximum Outside Width bw (mm) | Breaking Force (kN) |
|---|---|---|---|---|---|
| SV2060 | 6.0 | 1.1 | 18.0 | 22.2 | 56.5 |
| SV2070 | 7.0 | 1.5 | 21.0 | 25.9 | 77 |
| SV2080 | 8.0 | 2.0 | 24.0 | 29.6 | 101 |
| SV2100 | 10.0 | 3.2 | 30.0 | 37.0 | 160 |
| SV2130 | 13.0 | 5.2 | 39.0 | 48.1 | 268 |
- W.L.L.: Working Load Limit(t)
Fittings (Clevis Type)
- When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.
- The specifications of clevis-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.
- Each fitting has the chain pins and spring pins attached.
- The weight of each fitting shown in catalogue includes the weights of the chain pins and spring pins.
Fittings (Clevis Type) – Clevis Master Link VE for single leg slings
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | m | t | |||
| VE2060 | 1.1 | 6 | 115 | 56 | 79 | 90 | 11.5 |
| VE2070 | 1.5 | 7 | 131 | 63 | 91 | 100 | 14 |
| VE2080 | 2.0 | 8 | 130.5 | ||||
| VE2100 | 3.2 | 10 | 146 | 71 | 105 | 110 | 17 |
| VE2130 | 5.2 | 13 | 169.5 | 80 | 122 | 125 | 21 |
- W.L.L.: Working Load Limit(t)
Fittings (Clevis Type) – Clevis Master Link VD for double leg slings, for triple and quadruple leg slings
Specifications
※Major capacities example
- Using Single Connector VA or Dual Connector VB
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | |||||
|---|---|---|---|---|---|---|---|---|
| D | T,Q | p | a | b | m | t | ||
| VD206 | 1.7 | 6 | – | 125 | 63 | 91 | 100 | 14 |
| VD20706 | 2.4 | 7 | 6 | 140 | 71 | 105 | 110 | 17 |
| VD20807 | 3.2 | 8 | 7 | 139.5 | ||||
| VD21008 | 5.1 | 10 | 8 | 159 | 80 | 122 | 125 | 21 |
| VD21310 | 8.0 | 13 | 10 | 179.5 | 90 | 142 | 140 | 26 |
- W.L.L.: Working Load Limit(t)
- Chain Diameter D,TQ mean the number of sling legs. D: Double leg slings / TQ: Triple and quadruple leg slings
Fittings (Clevis Type) – Single Connector VA
Specifications
※Major capacities example
| Code | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|
| p | h | b | l | t | ||
| VA2060 | 6 | 39.5 | 38 | 22 | 69 | 7 |
| VA2070 | 7 | 43 | 27 | 75.5 | 8 | |
| VA2080 | 8 | 50 | 44 | 84.5 | 10 | |
| VA2100 | 10 | 59 | 54 | 34 | 102 | 12.5 |
| VA2130 | 13 | 80 | 66 | 42 | 132 | 16 |
Fittings (Clevis Type) – Dual Connector VB
Specifications
※Major capacities example
| Code | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|
| p | h | b | l | t | ||
| VB2060 | 6 | 39.5 | 38 | 48 | 70 | 7 |
| VB2070 | 7 | 43 | 57 | 77 | 8 | |
| VB2080 | 8 | 50 | 44 | 86 | 10 | |
| VB2100 | 10 | 59 | 54 | 72 | 104 | 12.5 |
| VB2130 | 13 | 80 | 66 | 90 | 134 | 16 |
Fittings (Clevis Type) – Sling Hook VSL(VSL3)
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | b | n | s | t | |||
| VSL3060 | 1.1 | 6 | 85 | 38 | 45 | 24.5 | 18 |
| VSL3070 | 1.5 | 7 | 100 | 44 | 50 | 30 | 21.8 |
| VSL3080 | 2.0 | 8 | 99.5 | ||||
| VSL3100 | 3.2 | 10 | 119 | 54 | 56 | 37.5 | 27.2 |
| VSL3130 | 5.2 | 13 | 140 | 66 | 63 | 47.5 | 34.5 |
- W.L.L.: Working Load Limit(t)
Fittings (Clevis Type) – Foundry Hook VF
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | b | n | s | t | |||
| VF2060 | 1.1 | 6 | 100 | 32 | 53 | 26 | 21.5 |
| VF2070 | 1.5 | 7 | 120.4 | 40 | 64 | 31 | 25.5 |
| VF2080 | 2.0 | 8 | |||||
| VF2100 | 3.2 | 10 | 131 | 50 | 76 | 34 | |
| VF2130 | 5.2 | 13 | 165 | 58 | 89 | 44.5 | 40 |
- W.L.L.: Working Load Limit(t)
Fittings (Clevis Type) – Grab Hook VG
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | |||
|---|---|---|---|---|---|---|
| p | b | m | s | |||
| VG2060 | 1.1 | 6 | 50.5 | 30 | 8 | 20.5 |
| VG2070 | 1.5 | 7 | 65.5 | 37 | 10 | 27.5 |
| VG2080 | 2.0 | 8 | 65 | |||
| VG2100 | 3.2 | 10 | 80 | 45 | 13 | 36 |
| VG2130 | 5.2 | 13 | 105.5 | 56 | 16 | 47 |
- W.L.L.: Working Load Limit(t)
- In the situation of using the Grab Hook VG in combination with the chain, the working load limits will become 70% of the values in the above table.
Fittings (Clevis Type) – Shortening Clutch VW
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | b | m | r | l | |||
| VW2060 | 1.1 | 6 | 45 | 30 | 8 | 24 | 74 |
| VW2070 | 1.5 | 7 | 56 | 35 | 8.6 | 27.5 | 92.5 |
| VW2080 | 2.0 | 8 | 9.6 | 30.5 | |||
| VW2100 | 3.2 | 10 | 78 | 47 | 12.5 | 38.5 | 125.5 |
| VW2130 | 5.2 | 13 | 90 | 58 | 15 | 50.5 | 146.5 |
- W.L.L.: Working Load Limit(t)
Fittings (Clevis Type) – Shackle VN
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | c | d | |||
| VN2060 | 1.1 | 6 | 65 | 26.5 | 50 | 43 | 14 |
| VN2070 | 1.5 | 7 | 70.5 | 30.5 | 60 | 47.5 | 17 |
| VN2080 | 2.0 | 8 | 70 | ||||
| VN2100 | 3.2 | 10 | 79.5 | 34 | 68 | 53 | 20 |
| VN2130 | 5.2 | 13 | 99.5 | 43 | 85 | 67 | 25 |
- W.L.L.: Working Load Limit(t)
Fittings (Clevis Type) – Single Connector VC
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | l | t | |||
| VC2060 | 1.1 | 6 | 50 | 18.5 | 45 | 77.5 | 13.5 |
| VC2070 | 1.5 | 7 | 65 | 26.5 | 60 | 99.5 | 17 |
| VC2080 | 2.0 | 8 | 64.5 | ||||
| VC2100 | 3.2 | 10 | 79 | 32.5 | 74 | 123 | 21.5 |
| VC2130 | 5.2 | 13 | 99.5 | 42 | 94 | 154 | 26.5 |
- W.L.L.: Working Load Limit(t)
Fittings (Clevis Type) – Endless Connector VR
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||
|---|---|---|---|---|---|
| p | b | l | |||
| VR2060 | 1.1 | 6 | 25.5 | 38 | 55 |
| VR2070 | 1.5 | 7 | 31 | 44 | 67 |
| VR2080 | 2.0 | 8 | 30 | ||
| VR2100 | 3.2 | 10 | 39 | 54 | 86 |
| VR2130 | 5.2 | 13 | 50 | 66 | 108 |
- W.L.L.: Working Load Limit(t)
Fittings (Clevis Type) – Sling Hook (Small Hook) VSL(VSL2)
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | b | n | s | t | |||
| VSL2060 | 1.1 | 6 | 69 | 29.5 | 29.5 | 20.5 | 15 |
| VSL2070 | 1.5 | 7 | 95 | 36 | 39 | 28 | 19 |
| VSL2100 | 3.2 | 10 | 110 | 44.5 | 47 | 33 | 25 |
| VSL2130 | 5.2 | 13 | 136 | 51 | 58 | 41 | 30 |
| VSL2160 | 8.0 | 16 | 155 | 67 | 64 | 49 | 37.5 |
- W.L.L.: Working Load Limit(t)
Fittings (Eye Type)
- When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.
- The specifications of eye-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.
- In addition to using the eye-type components by assembling them as KITO Chain Sling 100 products, they can also be used for many other purposes.
- Each fitting is not provided with a Hi-coupling HC. This should be ordered at the same time when placing the order for the fitting.
Fittings (Eye Type) – Master Link HM
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| S | D | p | a | d | t | ||
| HM20706 | 1.1 | 6 | – | 110 | 60 | 13 | 11 |
| 1.7 | 7 | 6 | |||||
| HM20807 | 2.4 | 8 | 7 | 16 | 14 | ||
| HM21008 | 3.2 | 10 | 8 | 135 | 75 | 18 | 15 |
| HM21310 | 5.2 | 13 | 10 | 160 | 90 | 22 | 18.5 |
| HM21613 | 8.0 | 16 | 13 | 180 | 100 | 26 | 22 |
- W.L.L.: Working Load Limit(t)
- Chain Diameter S,D mean the number of sling legs. S: Single leg slings / D: Double leg slings
Fittings (Eye Type) – Sling Hook HTL(HTL3)
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | n | s | |||
| HTL3060 | 1.1 | 6 | 100 | 23 | 11 | 45 | 24.5 |
| HTL3080 | 1.5 | 7 | 120 | 27 | 13.5 | 50 | 30 |
| 2.0 | 8 | ||||||
| HTL3100 | 3.2 | 10 | 140 | 32.5 | 17 | 56 | 37.5 |
| HTL3130 | 5.2 | 13 | 171 | 38 | 21.5 | 63 | 47.5 |
| HTL3160 | 8.0 | 16 | 200 | 46 | 26.5 | 75 | 60 |
- W.L.L.: Working Load Limit(t)
Fittings (Eye Type) – Self Locking Hook HJ
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | n | s | |||
| HJ2060 | 1.1 | 6 | 109 | 19.5 | 11 | 34.5 | 20.5 |
| HJ2080 | 1.5 | 7 | 135 | 24.5 | 12 | 43.5 | 25.5 |
| 2.0 | 8 | ||||||
| HJ2100 | 3.2 | 10 | 168 | 32 | 16 | 56 | 30.5 |
| HJ2130 | 5.2 | 13 | 205 | 38.5 | 20 | 69 | 39.5 |
| HJ2160 | 8.0 | 16 | 251 | 48 | 27 | 80 | 49 |
- W.L.L.: Working Load Limit(t)
Fittings (Eye Type) – Swivel Hook HK
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | c | n | |||
| HK2060 | 1.1 | 6 | 158 | 35.5 | 14 | 26 | 34.5 |
| HK2080 | 1.5 | 7 | 182 | 43.5 | |||
| 2.0 | 8 | ||||||
| HK2100 | 3.2 | 10 | 217 | 43.5 | 17.5 | 33 | 56 |
| HK2130 | 5.2 | 13 | 271 | 48.5 | 22.5 | 43 | 69 |
- W.L.L.: Working Load Limit(t)
Fittings (Eye Type) – Foundry Hook HQ
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | n | s | |||
| HQ2060 | 1.1 | 6 | 102.5 | 13.5 | 12.5 | 53 | 26 |
| HQ2080 | 1.5 | 7 | 125 | 22.5 | 15 | 62 | 31.5 |
| 2.0 | 8 | ||||||
| HQ2100 | 3.2 | 10 | 150 | 30 | 16.5 | 76 | 34 |
| HQ2130 | 5.2 | 13 | 173 | 25.5 | 20.5 | 89 | 44.5 |
| HQ2160 | 8.0 | 16 | 210 | 45 | 26 | 101 | 50.5 |
- W.L.L.: Working Load Limit(t)
Fittings (Eye Type) – Grab Hook HH
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | m | s | |||
| HH2060 | 1.1 | 6 | 51.5 | 12 | 10 | 8 | 20.5 |
| HH2080 | 1.5 | 7 | 69 | 15.5 | 12.5 | 10 | 27 |
| 2.0 | 8 | ||||||
| HH2100 | 3.2 | 10 | 86.5 | 20.5 | 17.5 | 13 | 36 |
| HH2130 | 5.2 | 13 | 110.5 | 23.5 | 19.5 | 16 | 47.5 |
| HH2160 | 8.0 | 16 | 129 | 30 | 23 | 19 | 60.5 |
- W.L.L.: Working Load Limit(t)
- In the situation of using the Grab Hook HH in combination with the chain, the working load limits will become 70% of the values in the above table.
Fittings (Eye Type) – Hi-coupling HC
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | c | d | |||
| HC3060 | 1.1 | 6 | 48 | 16.8 | 45 | 17.5 | 8 |
| HC3070 | 1.5 | 7 | 55 | 19.4 | 51 | 19 | 9.4 |
| HC3080 | 2.0 | 8 | 63 | 22 | 57 | 23 | 10.6 |
| HC3100 | 3.2 | 10 | 75 | 26.5 | 70 | 27 | 13.1 |
| HC3130 | 5.2 | 13 | 96 | 34 | 89 | 36 | 16.8 |
- W.L.L.: Working Load Limit(t)
Fittings (Eye Type) – Sling Hook (Small Hook) HTL(HTL2)
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| p | a | b | n | s | |||
| HTL2060 | 1.1 | 6 | 81 | 18.5 | 11.5 | 29.5 | 20.5 |
| HTL2080 | 1.5 | 7 | 101 | 23.5 | 11 | 39 | 27 |
| 2.0 | 8 | ||||||
| HTL2100 | 3.2 | 10 | 131 | 32.5 | 16 | 47 | 33 |
| HTL2130 | 5.2 | 13 | 159 | 41.5 | 19 | 58 | 43 |
| HTL2160 | 8.0 | 16 | 183 | 48 | 24.5 | 64.5 | 48.5 |
- W.L.L.: Working Load Limit(t)
Fittings (Eye Type) – Master Link with Sub Links HMS for triple and quadruple Leg slings
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||
|---|---|---|---|---|---|
| p | a | d | |||
| HMS2060 | 2.6 | 6 | 135 | 75 | 18 |
| HMS2070 | 3.2 | 7 | |||
| HMS2080 | 4.2 | 8 | 160 | 90 | 22 |
| HMS2100 | 6.4 | 10 | 180 | 100 | 26 |
| HMS2130 | 10.4 | 13 | 200 | 110 | 32 |
- W.L.L.: Working Load Limit(t)
- The Master Link with Sub Links is a master link that has sub links attached. It should be used with triple leg slings or quadruple leg slings. Because the working load limits are different from those of the Master Link HM (page 10), it has exclusive “Slinging Methods and W.L.L. (Working Load Limits)”. Please refer to “When using the Master Link HMS” described on page 5.
Fittings (Eye Type) – Large Master Link HL/HLD
Specifications
※Major capacities example
| Code | W.L.L. (t) | Chain Diameter (mm) | Dimensions (mm) | ||||
|---|---|---|---|---|---|---|---|
| S | D | p | a | d | t | ||
| HL020 | 1.1 | 6 | – | 225 | 112 | 17 | 13 |
| 1.5 | 7 | – | |||||
| 1.7 | – | 6 | |||||
| 2.0 | 8 | 7 | |||||
| HL030 | 3.2 | 10 | 8 | 20 | 16 | ||
| HL050 | 5.0 | 13 | 10 | 23 | 19.5 | ||
- W.L.L.: Working Load Limit(t)
- Chain Diameter S,D mean number of chain. S: Single sling / D: Double sling
Standard Sling Types
Standard Sling Types (Clevis Type SCP2)
- A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as KITO Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.
- Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
- The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.
Standard Sling Types (Clevis Type SCP2) – Single Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S-VE-VE | S-VE-VSS | S-VE-VF | S-VE-VG* | S-VE-VC | S-VE-VN | S-VE-VW | S-VSS-VSS | S-VSS-VG* | S-VSS-VW | S-VW-VW | |||
| 1.1 | 6 (× 1) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 0.14 |
| Weight | 1.8 | 2.0 | 2.1 | 1.7 | 1.7 | 2.0 | 1.7 | 2.2 | 1.9 | 1.9 | 0.46 | ||
| 1.5 | 7 (× 1) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 0.17 |
| Weight | 2.7 | 3.0 | 3.2 | 2.5 | 2.6 | 3.0 | 2.6 | 3.3 | 2.9 | 2.9 | 1.0 | ||
| 2.0 | 8 (× 1) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 0.18 |
| Weight | 3.1 | 3.4 | 3.5 | 2.9 | 3.0 | 3.4 | 3.0 | 3.7 | 3.3 | 3.4 | 1.1 | ||
| 3.2 | 10 (× 1) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 0.24 |
| Weight | 4.9 | 5.6 | 5.5 | 4.9 | 4.9 | 5.4 | 5.1 | 6.3 | 5.6 | 5.7 | 2.4 | ||
| 5.2 | 13 (× 1) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 0.29 |
| Weight | 10.8 | 12.4 | 12.2 | 11.0 | 10.9 | 11.6 | 10.8 | 13.7 | 12.3 | 12.1 | 4.0 | ||
- For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.
Standard Sling Types (Clevis Type SCP2) – Double Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| D-VD-VSS | D-VD-VF | D-VD-VC | D-VD-VN | D-VD-OO | |||
| 1.7 | 6 (× 2) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 3.9 | 4.2 | 3.4 | 3.9 | 3.0 | ||
| 2.4 | 7 (× 2) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 5.9 | 6.2 | 5.1 | 5.8 | 4.3 | ||
| 3.2 | 8 (× 2) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 6.7 | 6.9 | 5.8 | 6.6 | 5.1 | ||
| 5.1 | 10 (× 2) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 11.1 | 11.1 | 10.0 | 11.0 | 8.3 | ||
| 8.0 | 13 (× 2) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 24.1 | 24.3 | 21.7 | 23.1 | 18.5 | ||
Standard Sling Types (Clevis Type SCP2) – Triple Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | |||
|---|---|---|---|---|---|---|
| T-VD-VSS | T-VD-VF | T-VD-VC | T-VD-VN | |||
| 2.4 | 6 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 6.4 | 6.9 | 5.7 | 6.4 | ||
| 3.2 | 7 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 8.9 | 9.4 | 7.7 | 8.9 | ||
| 5.0 | 8 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 11.2 | 11.4 | 10.1 | 11.0 | ||
| 8.0 | 10 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 18.8 | 18.8 | 17.1 | 18.6 | ||
| 12.5 | 13 (× 3) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 40.5 | 40.8 | 36.0 | 38.1 | ||
Standard Sling Types (Clevis Type SCP2) – Quadruple Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| Q-VD-VSS | Q-VD-VF | Q-VD-VC | Q-VD-VN | Q-VD-OO | |||
| 2.4 | 6 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 8.2 | 8.7 | 7.1 | 8.1 | 6.2 | ||
| 3.2 | 7 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 11.5 | 12.0 | 9.8 | 11.3 | 8.0 | ||
| 5.0 | 8 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 14.3 | 14.4 | 12.6 | 13.9 | 10.8 | ||
| 8.0 | 10 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 24.0 | 23.6 | 21.3 | 23.3 | 18.0 | ||
| 12.5 | 13 (× 4) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 51.8 | 51.3 | 44.9 | 47.7 | 39.0 | ||
Standard Sling Types (Eye Type SCE2)
- A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as KITO Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.
- Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
- The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.
Standard Sling Types (Eye Type SCE2) – Single Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| S-HM-HM | S-HM-HTS | S-HM-HJ | S-HM-HK | S-HM-HQ | S-HM-HH* | S-HTS-HTS | S-HTS-HH | |||
| 1.1 | 6 (× 1) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 1.8 | 2.0 | 2.0 | 2.1 | 2.1 | 1.7 | 2.1 | 1.9 | ||
| 1.5 | 7 (× 1) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 2.4 | 2.9 | 2.9 | 3.0 | 2.9 | 2.5 | 3.3 | 3.0 | ||
| 2.0 | 8 (× 1) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 3.1 | 3.4 | 3.6 | 3.6 | 3.5 | 3.1 | 3.7 | 3.4 | ||
| 3.2 | 10 (× 1) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 5.1 | 5.8 | 5.8 | 6.1 | 6.0 | 5.2 | 6.5 | 5.9 | ||
| 5.2 | 13 (× 1) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 10.7 | 12.1 | 12.1 | 12.8 | 11.9 | 11.4 | 13.5 | 12.8 | ||
- For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.
Standard Sling Types (Eye Type SCE2) – Double Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit ) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| D-HM-HTS | D-HM-HJ | D-HM-HK | D-HM-HQ | D-HM-OO | |||
| 1.7 | 6 (× 2) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 3.6 | 3.7 | 3.8 | 3.9 | 2.7 | ||
| 2.4 | 7 (× 2) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 5.6 | 5.7 | 5.9 | 5.6 | 3.9 | ||
| 3.2 | 8 (× 2) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 6.6 | 6.8 | 7.0 | 6.8 | 5.1 | ||
| 5.1 | 10 (× 2) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 11.1 | 11.3 | 11.6 | 11.5 | 8.2 | ||
| 8.0 | 13 (× 2) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 23.5 | 23.5 | 24.3 | 23.1 | 17.7 | ||
Standard Sling Types (Eye Type SCE2) – Triple Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit ) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | |||
|---|---|---|---|---|---|---|
| T-HM-HTS | T-HM-HJ | T-HM-HK | T-HM-HQ | |||
| 2.4 | 6 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 5.7 | 5.8 | 6.0 | 6.1 | ||
| 3.2 | 7 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 8.5 | 8.9 | 9.2 | 8.8 | ||
| 5.0 | 8 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 10.7 | 10.8 | 11.0 | 10.9 | ||
| 8.0 | 10 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 17.9 | 18.2 | 18.7 | 18.5 | ||
| 12.5 | 13 (× 3) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 36.8 | 37.7 | 38.9 | 36.2 | ||
Standard Sling Types (Eye Type SCE2) – Quadruple Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit ) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| Q-HM-HTS | Q-HM-HJ | Q-HM-HK | Q-HM-HQ | Q-HM-OO | |||
| 2.4 | 6 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 7.3 | 7.4 | 7.7 | 7.8 | 5.5 | ||
| 3.2 | 7 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 10.9 | 11.4 | 11.8 | 11.3 | 7.7 | ||
| 5.0 | 8 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 13.4 | 13.6 | 13.9 | 13.7 | 10.2 | ||
| 8.0 | 10 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 22.4 | 22.8 | 23.5 | 23.2 | 16.3 | ||
| 12.5 | 13 (× 4) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 46.5 | 47.7 | 49.3 | 45.7 | 35.5 | ||
Standard Sling Types (Eye Type SCE2 (HMS)) Master Link HMS with Sub Links
- Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
- The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.
Standard Sling Types (Eye Type SCE2 (HMS)) – Triple Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | |||
|---|---|---|---|---|---|---|
| T-HMS-HTS | T-HMS-HJ | T-HMS-HK | T-HMS-HQ | |||
| 2.6 | 6 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 6.0 | 6.1 | 6.3 | 6.4 | ||
| 3.2 | 7 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 8.5 | 8.9 | 9.1 | 8.7 | ||
| 4.2 | 8 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 10.5 | 10.9 | 11.1 | 10.8 | ||
| 6.4 | 10 (× 3) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 17.2 | 17.5 | 18.0 | 17.8 | ||
| 10.4 | 13 (× 3) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 35.6 | 36.5 | 37.7 | 35.0 | ||
Standard Sling Types (Eye Type SCE2 (HMS)) – Quadruple Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | |||
|---|---|---|---|---|---|---|
| Q-HMS-HTS | Q-HMS-HJ | Q-HMS-HK | Q-HMS-HQ | |||
| 2.6 | 6 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 7.6 | 7.7 | 8.0 | 8.1 | ||
| 3.2 | 7 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 10.9 | 11.4 | 11.8 | 11.2 | ||
| 4.2 | 8 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 13.3 | 13.7 | 14.0 | 13.6 | ||
| 6.4 | 10 (× 4) | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 21.7 | 22.1 | 22.8 | 22.5 | ||
| 10.4 | 13 (× 4) | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 45.3 | 46.5 | 48.1 | 44.5 | ||
Standard Sling Types (Eye Type SCE2 (HL/HLD)) Master Link HL/HLD
- Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
- The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.
Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Single Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | |||||
|---|---|---|---|---|---|---|---|---|
| S-HL-HL | S-HL-HTS | S-HL-HJ | S-HL-HK | S-HL-HQ | S-HL-HH※ | |||
| 1.1 | 6（×1） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 3.7 | 2.9 | 2.9 | 3.0 | 3.1 | 2.7 | ||
| 1.5 | 7 （×1） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 4.1 | 3.7 | 3.8 | 3.9 | 3.8 | 3.3 | ||
| 2.0 | 8 （×1） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 4.1 | 3.9 | 4.0 | 4.1 | 4.0 | 3.5 | ||
| 3.2 | 10 （×1） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 6.1 | 6.2 | 6.3 | 6.5 | 6.4 | 5.6 | ||
| 5.0 | 13 （×1） | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 11.1 | 12.3 | 12.6 | 13.0 | 12.1 | 11.6 | ||
| W.L.L. (Working Load Limit) (t) | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| S-HLD-HLD | S-HLD-HTS | S-HLD-HJ | S-HLD-HQ | S-HLD-HH | |||
| 8.0 | 16 （×1） | Reach: L | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Weight | 29.7 | 28.6 | 28.4 | 27.9 | 26.8 | ||
| 11.5 | 20 （×1） | Reach: L | 3.0 | 3.0 | – | 3.0 | 3.0 |
| Weight | 47.2 | 49.0 | – | 46.2 | 43.5 | ||
- For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.
Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Double Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) θ=60° | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| D-HL-HTS | D-HL-HJ | D-HL-HK | D-HL-HQ | D-HL-OO | |||
| 1.7 | 6 （×2） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 4.7 | 4.6 | 4.8 | 4.9 | 3.7 | ||
| 2.0 | 7 （×2） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 6.2 | 6.5 | 6.6 | 6.4 | 4.6 | ||
| 3.2 | 8 （×2） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 7.0 | 7.2 | 7.4 | 7.2 | 5.5 | ||
| 5.0 | 10 （×2） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 11.3 | 11.5 | 11.9 | 11.7 | 8.3 | ||
| W.L.L. (Working Load Limit) (t) θ=60° | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| D-HLD-HTS | D-HLD-HJ | D-HLD-HK | D-HLD-HQ | D-HLD-OO | |||
| 8.0 | 13 （×2） | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 30.3 | 30.3 | 31.1 | 29.9 | 24.5 | ||
| 11.5 | 16 （×2） | Reach: L | 2.5 | 2.5 | – | 2.5 | 2.5 |
| Weight | 55.6 | 55.2 | – | 54.2 | 44.9 | ||
Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Triple Leg Sling
Specifications
※Major capacities example.
| W.L.L. (Working Load Limit) (t) θ=60° | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | |||
|---|---|---|---|---|---|---|
| T-HL-HTS | T-HL-HJ | T-HL-HK | T-HL-HQ | |||
| 2.0 | 6 （×3） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 6.2 | 6.1 | 6.4 | 6.6 | ||
| 3.2 | 7 （×3） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 8.9 | 9.3 | 9.4 | 9.2 | ||
| 5.0 | 8 （×3） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 10.8 | 11.2 | 11.4 | 11.0 | ||
| W.L.L. (Working Load Limit) (t) θ=60° | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | |||
|---|---|---|---|---|---|---|
| T-HLD-HTS | T-HLD-HJ | T-HLD-HK | T-HLD-HQ | |||
| 8.0 | 10 （×3） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 23.9 | 24.2 | 24.7 | 24.5 | ||
| 11.5 | 13 （×3） | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 43.7 | 44.6 | 45.8 | 43.1 | ||
Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Quadruple Leg Sling
Specifications
※Major capacities example
| W.L.L. (Working Load Limit) (t) θ=60° | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| Q-HL-HTS | Q-HL-HJ | Q-HL-HK | Q-HL-HQ | Q-HL-OO | |||
| 2.0 | 6 （×4） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 7.7 | 7.6 | 7.9 | 8.2 | 5.8 | ||
| 3.2 | 7 （×4） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 11.3 | 11.7 | 11.9 | 11.6 | 8.0 | ||
| 5.0 | 8 （×4） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 13.4 | 13.9 | 14.2 | 13.7 | 10.3 | ||
| W.L.L. (Working Load Limit) (t) θ=60° | Chain Diameter (mm) (× Number of Chains) | Dimensions (mm) Mass (Weight) (kg) | Code | ||||
|---|---|---|---|---|---|---|---|
| Q-HLD-HTS | Q-HLD-HJ | Q-HLD-HK | Q-HLD-HQ | Q-HLD-OO | |||
| 8.0 | 10 （×4） | Reach: L | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Weight | 28.0 | 28.4 | 29.1 | 28.8 | 21.9 | ||
| 11.5 | 13 （×4） | Reach: L | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
| Weight | 52.9 | 54.1 | 55.7 | 52.1 | 41.9 | ||
